Fixed-length safety seal with a dual-lock closure mechanism

• The design of the locking system with a double spring increases the level of security
• POM plastic locking mechanism withstands high temperatures and increases safety level
• The lid is secured by a hot weld that leaves traces in case of attempted fraud
• When the seal is closed, the tip protruding from the rear confirms that it has been closed
• Anti-rotation closure system
• Sealed material: polypropylene (PP)

• Locking mechanism: polyoxymethylene (POM)

• Traction resistance (closed): About 11 kg
• Numbering: 7 digits
• Barcode:2/5 interlaced or code 128 on special request
• Other codes on demand
• Customer name/logo:Hot or laser-marked directly on the material, on request only
• Colors - Version with numbering:Red 1797C, blue 285C, green 347C, yellow 108C, orange 164C, white
• Colors - Direct laser barcode on matter:Yellow 100U, blue 290U, green 347C, white

  Other colors on demand

• Packaging:Grids of 10 sealed, box of 1000 sealed, cardboard of 5000 pieces

  98.5 x 37.5 x 21.8 cm (0.081 m3 ), about 19.0 kg

• Safety seals must be stored in their original packaging and protected from sunlight and chemical fumes. The optimal storage is at 22oC/50% HR. The shelf life of the safety seals made from PP and PA plastics is approximately 18 months after the date of manufacture. We recommend that you do not order more than your annual needs.

Putting in place the seal

Opening the seal