- Out-of-Stock
MULTICOOL 12a charging pack to replace the 1234yf, with charging hose and fitting-1 x 420grs
Application and use:
Perfect for use in small commercial refrigeration and air conditioning systems, in which R12, R134a, 1234yf and duracool 12a have traditionally been used.
Security:
The safe application of hydrocarbon refrigerants by accredited technical experts is guaranteed with a common sense approach and compliance with applicable safety standards and regulations.
Simply put, hydrocarbon-based refrigerant can also be used in refrigerators and air conditioning systems.
However, like gasoline, solvents and other common volatile substances, hydrocarbon refrigerant is highly flammable, so its release must be prevented when an ignition source is present. The auto-ignition temperature of the refrigerant is 460-470 ° C.
Product features:
- High purity hydrocarbon refrigerant.
- Precision propane/isobutane blend.
- Superior heat rejection – gives better heat exchange performance of the condenser.
- Only 35% by required weight of the recommended fluorocarbon refrigerant load.
- Recommended digital scales – they save a lot of time and also help avoid wasting refrigerant.
- MULTICOOL 12a is compatible with any lubricating refrigerant.
Effect on systems:
- Lower discharge pressures reduce the load on the compressor.
- Less heat at the compressor.
- Less engine draining at idle and running.
- Choice between reverse or single-use valve.
- Faster descent temperature to the vent.
- Lower the vent temperature at all times
- No upgrades to existing equipment are required.
- No changes to repair procedures during installation.
Package Description:
Comes with a 750 ml can, or 420g of product (equivalent to 1190grs of 1234yf), our DC402 charging hose and a 1234yf low pressure fitting, allowing you to connect on a 1234yf circuit
The DC402 hose supplied in the kit features the original R12 and R134a fittings. For use on a car at 1234yf, it will be necessary to unscrew the original r134a fitting and replace it with the 1234yf fitting supplied with the pack
ADVANTAGE of MULTICOOL 12a: MULTICOOL refrigerants do not require approvals to be purchased, or installed in an empty circuit of CFCs, HFCs or HCFCs.
Although MULTICOOL12a is miscible with R12, R134a and 1234yf, it is forbidden to mix these freons with each other
Any intervention on a circuit still containing fluorine: CFC, HFC or HCFC requires the intervener to comply with the laws in force (Decree of 4 July 2009), namely to have the freon recovered beforehand by a duly authorized professional.
Technical data sheet
- Summary#1
- Our products are completely sustainable: they do not contain chlorine or fluorine, which are considered the most harmful substances for the environment by the Montreal and Kyoto Protocols.
- Summary#2
- Multicool 12a effectively replaces gases R12, R134a, 1234yf, duracool , frostycohol ...
- Summary#3
- Multicool 12a is considered environmentally friendly because it has a global warming potential (GWP) of 3 and an ozone depletion potential (ODP) of zero
- Summary#4
- Very easy to use! A can of Multicool 12a of 420grs is equivalent to 1150 grs of R134a, 1190grs of 1234yf, 1275grs of R12
- Summary#5
- The DC402 hose supplied in the kit features the original R12 and R134a fittings. For use on a car at 1234yf, it will be necessary to unscrew the original r134a fitting and replace it with the 1234yf fitting supplied with the pack