Kit de micro-irrigation avec tuyau, goutteurs et raccords

    Micro-irrigation kit with hose, drips and fittings

    070100
    Micro-irrigation kit consisting of a 25m pipe, a batch of 100 droppers, a drill and inlet and exit fittings. Ideal to start micro-irrigation in your garden.
    29 Items
    €34.30
    Tax included

    Including €0.49 for ecotax

    (3,4/5) out of 10 total ratings
    Read the reviews
    Drip watering is a very effective irrigation solution in the garden as well as on the terrace or balconies, where a micro-irrigation kit will find its full interest thanks to its ease of installation and efficiency.

    This kit is made up of:

    • 1 25m micro-irrigation pipe, 16mm diam
    • 1 batch of 100 dropers with adjustable flow and 0 to 70 litres per hour
    • 1 ejector puncher, to be able to make holes in the hose and fix the droppers
    • 1 female entry connection fast fitting
    • 1 16mm diam end compression fitting, to put at the end of the pipe to prevent water from leaking
    • 1 male faucet nose fast fitting 3/4'' thread, to screw on your garden faucet
    • 1 male fast fitting

    Namely, the pipe delivered coiled, is rigid at the beginning. Just leave it in the sun for a while and it will naturally soften. The entrance fitting at one end of the pipe and the fine line cap at the other end will have to be connected on one side. The input fitting will then have to be plugged into the male faucet fast fitting screw to your garden faucet. All you have to do is pierce the hose at your convenience and attach the droppers to it, adjust the flow of the dropers according to the plants to be watered.




    Multitanks
    070100
    29 Items

    1 other product in the same category: